How to Clean Grout (Without Scrubbing All Day)

You can mop a tiled floor until it gleams and still have it look dirty, because the grout lines stay gray. Grout is porous. It soaks up spilled drinks, soap scum, mop water and whatever else lands on it, and once that grime settles in, a regular mop just moves it around.
Getting it back to its original color is mostly about using the right cleaner and giving it time to work, so you don't have to scrub as hard.
First, a few warnings
Know what your tile is before you start. Natural stone like marble, travertine and limestone is damaged by acids, so skip vinegar and anything acidic on or near it. A cleaner made for stone is the safe choice there.
Be careful with vinegar on grout in general. It's often recommended, but ordinary cement-based grout doesn't love acids, and using them again and again can wear it down over time. An occasional wipe won't ruin anything, but it shouldn't be your main grout cleaner.
And as always, don't mix products. Bleach plus vinegar or bleach plus ammonia gives off toxic fumes, which is a real risk in a small bathroom. Our guide to cleaners you should never mix covers the rest.
What you'll need
- A stiff grout brush, or an old toothbrush for small areas
- Baking soda
- 3% hydrogen peroxide
- Oxygen bleach powder (sodium percarbonate) for heavy stains
- A spray bottle, a bucket and some cloths
- Gloves
Method 1: Warm water and a brush
Start gentle. Spray the grout with warm water, scrub along the lines with the brush in short strokes, and wipe the loosened dirt away with a damp cloth. For grout that's just a little dull, this is sometimes all it needs.
Method 2: Baking soda and peroxide paste
This is the method that works for most grout. Mix baking soda with enough hydrogen peroxide to make a paste about as thick as toothpaste. Spread it along the grout lines and let it sit for 10 to 15 minutes. The peroxide fizzes a little and lifts stains, while the baking soda gives you a gentle scrub.
Scrub with the brush, then wipe clean with a damp cloth and rinse well so no white residue dries in the lines. Work in small sections so the paste doesn't dry out before you get to it.
Peroxide has a mild bleaching effect. That's great on white or light grout, but test a hidden spot first if your grout is colored.
Method 3: Oxygen bleach for set-in stains
For floors that haven't had a proper clean in years, oxygen bleach is a big help. It's sold as a powder, often near the laundry products. Dissolve it in warm water according to the package, pour or brush it over the grout, and leave it for 10 to 15 minutes, or as long as the label suggests. Keep it wet the whole time. Then scrub, rinse thoroughly with clean water and dry the floor.
Oxygen bleach is gentler on colored grout than chlorine bleach and doesn't have the harsh fumes, though you should still wear gloves and keep the room ventilated.
What about chlorine bleach?
Diluted bleach can whiten white grout and kill mildew in showers, but it can also fade colored grout, and the fumes are strong in a small space. If you use it, dilute it as the label says, open a window, rinse thoroughly afterward, and never use it in the same session as vinegar or an ammonia cleaner.
Shower grout and mildew
Black spots in shower grout are usually mildew. Spray the area with hydrogen peroxide, leave it for 10 minutes, then scrub and rinse. If the mildew keeps coming back, the real problem is moisture. Run the fan during your shower and for a while afterward, squeegee the walls, and leave the door or curtain open so the shower can dry. If the staining goes deep and won't budge, the grout may need to be removed and replaced.
Seal it once it's clean
Once the grout is clean and completely dry, a grout sealer makes the next clean much easier, because spills sit on top instead of soaking in. Most sealers are brushed or rolled onto the grout lines. How often to reseal depends on the product and how much traffic the area gets, so check the label. A simple test: drip a little water on the grout. If it darkens and soaks in quickly, it's time to reseal.
Keeping grout clean
- Wipe up spills before they soak in, especially coffee, wine and sauces on kitchen floors.
- Change your mop water often. Dirty water settles into the grout lines.
- Use a pH-neutral floor cleaner for regular mopping.
- Give the grout a quick scrub every month or two, before stains set.
If you're working on the bathroom anyway, our guide to removing hard water stains from shower doors pairs well with this one.
Comments
Post a Comment